Phenyl vinyl silicone resin Lo-417A-35A
The reliability of LED is 30% decided by the chip and 70% decided by the encapsulation. The Vinyl Phenyl Silicone
Resin is used in LED and the encapsulation protection ofElectronic and electrical components. High cured film hardness,
light transmission,ow light decay,good anti-yellowing and ageing-resistance,ow shrink and small moisture absorption
rate;It has excellent adhesion to PPA,PCB,electrical components,ABS,meta. Excellent mechanical and electrical insuating
property.Super heat stability. Good solvent and water later resistance,anti-ablative and radiation resistance.
It is used in LED and the encapsulation of the Electronic and electrical components: to make the low hardness of LED
encapsulation silicone rubber and silicone gel and fix the electronic components ,together with hydrogen phenyl silicone
resin and vinyl phenyl silicone resin. It has good light transmission.
| Product NO. | Typical Properties | Product Category | |
| Lo41-7A | Viscosity | 7000 | Phenyl vinyl silicone resin |
| Refractive index | 1.55 | ||
| Volatile content | ≤2% | ||
| Vinyl content | 4.0% | ||
| Lo41-10A | Viscosity | 10000 | Phenyl vinyl silicone resin |
| Refractive index | 1.55 | ||
| Volatile content | ≤1% | ||
| Vinyl content | 4.0% | ||
| Lo41－12A | Viscosity | 12000 | Phenyl vinyl silicone resin |
| Refractive index | 1.546 | ||
| Volatile content | 1.0% | ||
| Vinyl content | 2.5% | ||
| Lo41－14A | Viscosity | 14000 | Phenyl vinyl silicone resin |
| Refractive index | 1.55 | ||
| Volatile content | ≤1% | ||
| Vinyl content | 4.0% | ||
| Lo41－09A | Viscosity | 900 | Phenyl vinyl silicone resin |
| Refractive index | 1.538 | ||
| Volatile content | 1.0% | ||
| Vinyl content | 5.5% | ||
| Lo41－35A | Viscosity | 35000 | Phenyl vinyl silicone resin |
| Refractive index | 1.55 | ||
| Volatile content | ≤1% | ||
| Vinyl content | 5.0% | ||