Electronic potting adhesive

Product name:  
Electronic potting adhesive
Features:

• Fast curing, high production efficiency, easy to use;
• Keep the rubber elasticity in a wide temperature range (-60ºC to 250ºC), excellent electricity Performance , good thermal
  conductivity;
• Moisture-proof, chemical resistance, yellowing resistance, resistance to weathering than 25 years;
• Good adhesion with plastics, rubber, nylon PA and polyphenylene oxide PP;
• RoHS approved

Technical parameters:
Inspection condition: tested in 25ºC, humidity 55%, cured for 7 days

Item	Unit	Two-component
		Silicone gel	Addition-type potting adhesive		Condensation-type potting adhesive
		3830	3833	3838	36833	36838
Appearance	--	transparent	White/gray /black	White/gray /black	White/gray /black	White/gray /black
Density	g/cm3	0.98	1.40	1.54	1.35	1.50
Mix ratio (wt)	--	1:1	1:1	1:1	10:1	10:1
Viscosity of component A	mPa•s	500-10000	3000	6000	4500	8000
Viscosity of component B	mPa•s	500-10000	3000	6000	50	50
Viscosity ofl mixed component	mPa•s	500-10000	3000	6000	3000	6500
Operational time	min	20-60	20-60	20-60	30-60	30-60
Curing time	hr	1-3	1-3	1-3	2-4	2-4
Hardness	Shore A	15-30	30-50	40-60	30-50	40-60
Tensile strength	MPa	--	1.0	1.2	1.0	1.2
Elongation at break	%	--	120	100	120	100
Dielectric strength	KN/m	24	22	20	20	19
Volume resistivity	Ω•cm	1016	1015	5×1014	5×1014	1014
Therma conductivity	W/mK	0.15	0.3	0.8	0.3	0.8
Flame retardant rating	--	HB	HB	VO	HB	VO

Application:

• Package of high-power LED and power supply module
• Moisture-proof, waterproof potting protection of Electronic components, communications equipment and PCB substrate
• The package of LED display, and energy-saving lamps
• Waterproofl potting of heat exchangers, sensors, modules, circuit boards
• Potting protection of Car accessories, solar PV module junction box

Packing:
1L/5L/20L/200L/drum